0
Owner's of the Behringer Stereo System Digital iPad/Tablet Mixer gave it a score of 0 out of 5. Here's how the scores stacked up:
(EN) Step 3: Network
Connection
DIGITAL iPAD/TABLET MIXER X18/XR18 Network Connection
Getting Started
First Wi remote connection to your
X AIR mixer
1. Download and install the remote
control app for your device.
• Android smartphones/tablets:
X AIR Android from the Google
Play* store
• Apple iPad: X AIR for iPad from
the Apple*Appstore
• PC: X AIR EDIT for Windows, Mac
or Linux from behringer.com
2. Set the REMOTE switch on your X AIR
mixer to ACCESS POINT mode and
power on the mixer.
3. Reset your X AIR mixer’s network
settings to default values by holding
the RESET button for 2seconds. This
is located in the small hole above the
Wi icon and requires a paper clip or
similar tool to reach.
4. Switch your remote control device on
and open the network settings.
Android smartphones/tablets:
1. Start the Settings/Wireless&
Networks dialog on your
Androidsystem.
2. Switch ’Wi ’ on.
3. Click on ’Wi ’ to select a network.
From the list of networks, select
your X AIR mixer’s name, e.g. “XR18-
19-1B-07”. After a few seconds, the
status should change to ’Connected’.
4. Open your X AIR for Android app and
it will show similar information:
• Mix Access = All
• IP Address = 192.168.1.1
• Wi Lock = None
• Wi connected to XR18-19-1B-07
5. You may choose to lock the
connection to this speci c Wi
network if you want to ensure that
your device cannot automatically
connect to another network while
you are controlling yourmixer.
6. Click on ’Connect’ and tap on the
mixer’s name in order to connect
the app with your mixer. Note - if a
warning pops up telling you that the
mixer rmware is not supported,
it is recommended to update the
rmware to the latest version
(seethe X18 pages on behringer.com
for details). You can, however,
choose to connect anyway.
7. Once the app is connected to your
mixer, allparameters will be loaded
automatically. Enjoyexploring
all mixing functions of your XAIR
mixerremotely!
Apple iPad:
1. Start the Settings/Wi dialog on
your iOS.
2. Switch ’Wi ’ on.
3. Select your X AIR mixer’s name
from the list of networks, e.g.
“XR18-19-1B-07”. After a couple of
seconds, the status should change
to ’Connected’, indicated by a
checkmark.
4. Open your X AIR for iPad app and
it will show any X AIR mixers
(’Devices’) found in that network,
with their IP address, which in this
case is192.168.1.1.
5. Tap on the mixer’s icon to connect
the app with your mixer.
Note - if a warning pops up telling
you that the mixer rmware is not
supported, it is recommended to
update the rmware to the latest
version (see the X18 pages on
behringer.com for details). You
can, however, choose to connect
anyway.
6. Once the app is connected to your
mixer, allparameters will be loaded
automatically. Enjoyexploring
all mixing functions of your XAIR
mixerremotely!
PC: X AIR EDIT for Windows, Mac or Linux
1. Open the Wireless Network
Connections dialog on your
operating system.
2. Make sure the ’WLAN’ or ’Wi ’
adapter is switched on.
3. View the list of wireless networks
and select your X AIR mixer’s name,
e.g. “XR18-19-1B-07”. Aftera
couple of seconds, the status should
change to ’Connected’, indicated by
a checkmark.
4. Open your X AIR Editor for Win/Mac/
Linux and click on ’Setup’. The list
will show any XAIR mixers found
in that network, withtheir name
and IP address, which in this case
is192 .168 .1.1.
5. Click on your mixer’s name,
e.g.“XR18-19-1B-07”, and con rm
to synchronize from mixer to PC in
order to connect the app with your
mixer. Ifa warning pops up telling
you that the mixer rmware is
not supported, it is recommended
to update the rmware to the
latest version (see the X18 pages
on behringer.com for details).
Youcan, however, choose to
connectanyway.
6. Once the app is connected to
your mixer, allparameters will
be transferred automatically.
Enjoyexploring all mixing functions
of your XAIR mixer remotely!
22 X AIR X18/XR18 23 Quick Start Guide
Find Your Products By Category
Please Login
