Tascam MP3 Player DP-32SD 32-Track Digital Portastudio User Manual

0

Out of 0 Ratings

Owner's of the Tascam MP3 Player DP-32SD 32-Track Digital Portastudio gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 76
 
16 TASCAM DP-32SD
2 - Quick Guide
3. Use the JOG/DATA dial to select (highlight blue) an item in
the list and then press the F4 (t) button to load a suitable
setting from the library.
The library list closes.
TIP
You can also adjust the parameters on the
COMP MULTI
screen
using the CURSOR buttons and JOG/DATA dial. (See “Using
mastering compression” on page 57.)
4. Press the F4 (
ON
) button to turn the compressor on.
The
OFF
icon changes to
ON
.
5. Press the F1 (g) button to return to the
Mastering
screen.
6. Press the PLAY (t) button on the
Mastering
screen to
listen to the master file with compression.
NOTE
If the
EQ
item is set to
ON
on the
EQUALIZER
screen, the effect of
the equalizer on the sound will also be heard.
ª
Normalizing
Normalizing maximizes the volume of the master file without
changing the dynamic range.
1. When in
Mastering
mode, press the F4 (
NORM
) button to
open the
NORMALIZE
screen.
2. Press the F2 (
YES
) button to perform the normalization.
3. Press the F1 (g) button to return to the
Mastering
screen.
ª
Re-recording the master file
Re-record the master file with equalization and compression
applied to create a new master file.
1. When in
Mastering
mode, press the RECORD (0)
button.
2. This will record over the master file and create a new master
file with equalization and compression applied.
Shutting down
Turn the unit off when you are done using it.
1. Press the HOME button to open the Home screen.
2. Press and hold the STANDBY/ON button on the rear panel
until
DIGITAL
PORTASTUDIO
appears on the display.
When the unit completes its automatic shutdown procedure,
which includes keeping a record of various information
about operations that have been performed until now, the
power turns off (enters standby mode).
Always use the procedure above to turn the power off
properly.
CAUTION
When the power is ON, do not disconnect the power
cord or otherwise interrupt the power to the unit. Doing
so will cause all settings made since the last time you
saved to be lost. If the power is interrupted while an SD
card is being accessed, all recorded songs and data on
the card could be damaged beyond recovery.

   Find Your Products By Category