Tascam MP3 Player DP-32SD 32-Track Digital Portastudio User Manual

0

Out of 0 Ratings

Owner's of the Tascam MP3 Player DP-32SD 32-Track Digital Portastudio gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 76
 
TASCAM DP-32SD 67
14 – Troubleshooting
The SD card is not recognized.
•
Confirm that the SD card is completely inserted.
Why can't I hear any sound when I play back?
•
Are the track faders of the tracks set to a proper level?
•
Is the STEREO fader set to a proper level?
•
Have you connected the PHONES or MONITOR OUT jacks to
your headphones or monitoring system properly?
Is your monitoring system set up correctly?
•
Is the MONITOR LEVEL knob set to a proper level? (PHONES
jack only)
The sound I am trying to record sounds distorted.
•
Are the INPUT A to H TRIM knobs on the top of the unit set
too high?
Is the input source too loud?
•
Is the monitoring system distorted because the monitoring
level is too high?
Why can't I record?
•
You must have at least one track in recording standby (REC
indicator flashing) before you can start recording by pressing
the RECORD (0).
•
Are input sources assigned to tracks? (See “Assigning inputs”
on page 33.)
Noise occurs if I connect a passive guitar or bass directly.
•
Connecting another device to the unit's STEREO OUT jacks
might reduce the noise.
•
This might be caused by interference from another device.
If there is a power amplifier or other device that uses a
large transformer, a fluorescent light or something similar
nearby, you might be able to reduce the noise by changing
the distance and orientation of this unit in relation to such
equipment.
The unit turns off.
•
This product is compliant with the European ErP standby
power regulations. In order to comply with these regulations,
the automatic power saving function is set to 30 minutes
when the unit is shipped from the factory. So, by default,
the unit will turn off automatically after 30 minutes elapse
without any operation. Change the automatic power saving
function setting if you want to disable it. (See "Setting
automatic power saving" on page 60.)
When working with this unit, if something is not working as you expect it should or if you experience any other difficulties, please refer
to this troubleshooting section first. It contains the most common troubles, their probable causes and corrective measures. In addition,
see the "Messages" chapter starting on page 68 for the meaning of messages that may appear on the display. Consult this table if a
message appears when an operation cannot be completed by the unit.

   Find Your Products By Category