0

Out of 0 Ratings

Owner's of the Samson Home Theater System Expedition gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
Page 12
of 112
 
11
XP106 • Portable PA System
Follow these steps below to
quickly get started using your
XP106 portable sound system.
Set the XP106's power
switch to the OFF
position, and fully turn
all of the LEVEL controls
counterclockwise to 0.
If an outlet is available,
connect the included power
adaptor to the DC IN of the
speaker, and plug it into an
AC socket.
Connect a microphone
using a standard XLR cable,
line level equipment using
a
1
4" instrument cable, or
portable audio device using
a
1
8" cable.
Switch on the XP106
power.
While speaking into the microphone or playing music from a line level
audio source, slowly raise the channel LEVEL until you have reached the
desired level.
NOTE: If not using the channel 1 input, turn the LEVEL control all the way down to
keep out any unwanted noise.
Quick Start
Setting a Good Level
Use the Channel LEVEL controls to set the individual volume of your micro-
phone, line level and Bluetooth
®
devices.
The PEAK light illuminates when the signal sending to the internal amplifier
begins to reach a level where distortion occurs. If the PEAK lights stay on,
your mix is too hot and you need to lower the LEVEL controls. It is okay for the
PEAK light to occasionally light, however it should go off quickly and should
not constantly stay on.
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
12
Bluetooth
®
is a wireless communication technology that allows for connectivity
between a wide range of devices. The XP106 uses Bluetooth to stream high quality
audio from your Bluetooth enabled device without the need for connecting any
cables. In order for your device to work with the XP106 it must first be paired.
1. Turn all channel VOL controls down counterclockwise to 0.
2. With the XP106 and your Bluetooth device powered on; press the PAIR
button on the top panel of the XP106 speaker to make the speaker discov-
erable. The Bluetooth indicator will slowly flash blue.
3. In the settings of your Bluetooth device, set it to “discover” available
devices.
4. From the Bluetooth device list, select the
"Samson XP106" device.
5. If your device asks for a passkey, enter
digits 0000 (four zeros) and press OK.
Some devices may also ask you to accept
the connection.
6. As the XP106 is connecting to your device,
the Bluetooth indicator will quickly flash
blue.
7. The XP106 speaker indicates that pairing
is complete when the indicator turns steady
blue. You can now stream audio from your
device to the XP106 speakers.
8. With the volume control on your Bluetooth
device turned up, play some music, and
slowly raise the XP106 BLUETOOTH chan-
nel VOL control until you have reached the
desired level.
Pairing with a Bluetooth® device
13
XP106 • Portable PA System
The XP106 has an internal, rechargeable battery capable of up to 20 hours
of continuous audio on a full charge. Even though the system may have some
charge when first taken out of the box, we recommend fully charging your
XP106 before first using the system.
To charge the battery:
Set the power switch to the
“OFF” position.
Connect the XP106 to an
AC power outlet using the
included power adapter.
Keep the system plugged in
until the Battery indicator
changes to green, indicating
the battery is fully charged.
The XP106 utilizes a sealed lead-acid gel cell battery. When not in use, the
battery will slowly self-discharge. If you are planning not to use the XP106
for a long period of time, it is advised to fully charge the unit before storing.
It is also important to charge the unit every six months when not used. This
will ensure a healthy battery and extend its life. If the battery is left with a
very low charge for an extended period of time, it is possible to recharge the
battery to working condition, but the charge time can take over 24 hours.
If you find that the operation time of the XP106 becomes noticeably
decreased, even after fully charging, the battery should be replaced. Contact
Samson customer service or your local distributor for a replacement battery.
Charging the Battery
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
null
  • Add more products to collection
  • Add more products to collection
  • Add more products to collection
  • Add more products to collection
  • Add more products to collection
  • Add more products to collection
  • Add more products to collection
-

Find a Product